Date/Time; Patient Limits - SYSMEX pocH-100i Instructions For Use Manual

5.1.2.2. Date/Time

For standard or daylight saving time, the clock must be set manually.
Press "Menu" > "Settings" >
"Date/Time".
Press "Menu" > "Settings" > "Date/Time".
Parameter Setting
yy/mm/dd;
Format mm/dd/yy;
dd/mm/yy
Year 2000 – 2037
Month 1 – 12
Day 1 – 31
Hour 0 – 23
0 – 59
Minute
Note
The underscored items are factory set-
tings.

5.1.2.3. Patient Limits

Enter the upper and lower limit marks for the patient results.
Press "Menu" > "Settings" > "Pa-
tient Limits".
• The listed values are the initial settings
made before shipment from the fac-
tory.
• If LL or UL that satisfy the following
conditions was entered in the Patient
Limit setting screen, a beep sounds
and the entering is canceled.
- LL is higher than UL.
- UL is lower than LL.
Press "Menu" > "Settings" > "Patient Limits".
Parameter LL (Lower Limit)
WBC
RBC
HGB
HCT
MCV
MCH
MCHC
PLT
RDW-SD
RDW-CV
LYM% (W-SCR)
MXD% (W-MCR)
NEUT% (W-LCR)
LYM# (W-SCC)
MXD# (W-MCC)
NEUT# (W-LCC)
MPV
PDW
P-LCR
Note
UL (Upper Limit)
3.0 15.0
2.50 5.50
8.0 17 .0
26.0 50.0
86.0 1 10.0
26.0 38.0
31.0 37 .0
50 400
37 .0 54.0
1 1.0 16.0
5.0 55.0
1.0 20.0
45.0 95.0
0.0 0.0
0.0 0.0
0.0 0.0
9.0 13.0
9.0 17 .0
13.0 43.0
i
pocH-100 Revised June 2008
5 - 4