Lpi-Constant Intensity; Lpm-Light Source Mode; Lpp-Constant Power - Christie GS Series Technical Reference

Examples
Set language to French:
(LOC+LANG 2)
Set language to Russian:
(LOC+LANG 7)
LPI–Constant Intensity
Adjusts the light source intensity.
Commands
Command Description
LPI <value> Sets the light source intensity.
Examples
Set the light source intensity to five:
(LPI 5)
LPM–Light Source Mode
Sets the light source and intensity modes.
Commands
Command Description
LPM <value> Sets the light source mode.
LPP–Constant Power
Sets the constant power mode.
GS Series Serial API Commands Technical Reference
020-000814-01 Rev. 1 (06-2015)
Values
0 to 10
7 (Default)
Values
0 = Constant Power—Specify the power level supplied
(Default)
1 = Constant Intensity—Maintain a specific brightness
level over time
3 = Eco Mode—Maintain specific brightness for as long
as possible
Serial API commands
36