Emerson Dixell iProChill IPC115D Application Manual page 84

And user can change a parameter's protecting level to Pr1 or Pr2 in this screen.
Click on the family name label can open this parameter family.
To modify a parameter, click on the value:

Press the

Increase or decrease the value using the

Confirm the modification by pressing the
and buttons also can be used to move the cursor. When cursor points to different parameters, the
parameter's description will display in the bottom.
Press the button can exit current screen.
Warning:
For parameter groups CF, IO, CA, and RA, they can be verified and changed only if the unit is switch-OFF
(stand-by).
1592025050 iProChill v2.5 10D00 AG v1.3 GB 18.02.2016.docx
button.
and buttons.
button again.
iProCHILL
84/205