Emerson Dixell iProChill IPC115D Application Manual page 72

6.6 ALARM BUTTON IN MAIN SCREEN
When an alarm occurs, the screen shows the flashing icon
starts to operate. Press anywhere on the screen can silence the buzzer.
Push button can enter in the Alarm display screen. In order to go back to previous screen, please press
the button.
Three types of alarms can be present:


Resettable in this case, the alarm is not active and can be reset. Position the cursor on the alarm
element and press


Password in this case, the alarm is not active, but a password is required to reset it.


Active the alarm is still in progress.
If there are several resettable alarms, instead of selecting them one by one, press
together.
To reset an alarm that is protected by a password, operate as follows:

Select the alarm marked by "Password".

Press .

Via buttons

Press to confirm.

If the password is correct, the following message will display:
1592025050 iProChill v2.5 10D00 AG v1.3 GB 18.02.2016.docx
.
and , set the password.
, the red LED switch ON and the buzzer
and they will all reset
iProCHILL
72/205