Table of Contents
Advertisement
5. USER INTERFACE VISOGRAPH 1.0 AND VISOGRAPH 2.0
Using the VISOGRAPH LCD graphic keyboard, it is possible to monitor and modify the status of the unit.
User can select UI type via configuring parameter DP12 in Wizmate with administrator authority. The options
are: VISOGRAPH 1.0, VISOGRAPH 2.0 and VISOTOUCH.
VISOGRAPH 1.0 and VISOGRAPH 2.0 are different in hardware and firmware, but they are showing the
same screens. The only difference is VISOGRAPH 2.0 can manage also two LEDs on the front panel in
addition.
Green LED: Always ON after power on.
Red LED: ON when have alarm active or resettable.
Display
Probes value of all
configured circuits
Display
Set point
Parameters Programming Time/Time periods
Defrost
Free-cooling
Screw compressor Discharge comp. temp. Domestic hot water Auxiliary heating
1592025050 iProChill v2.5 10D00 AG v1.3 GB 18.02.2016.docx
Main screen
Current alarms
Compressors
Heaters/Liquid line
solenoid valve
Unit status
Time and date
Probes value
Equipments status
Display
Water pump (Supply fan)
I/O status
Thermostatic Valve
Display
Display
Equipments status in all circuits
Compressor
Water pump
Fan
Alarms
Heat recovery
iProCHILL
Historical alarms
Auxiliary outputs
Control panel
13/205
Advertisement
Table of Contents
