Emerson Dixell iProChill IPC115D Application Manual page 188

Supply ventilation
Condensation ventilation
Support/boiler/anti-freeze
Pump/and water evaporator
and condenser
Compressors
Pump down solenoid valve
10.25 UNLOADING SIGNAL DUE TO EVAPORATOR WATER INLET HIGH TEMPERATURE
(Not available)
Alarm code
Display in keyboard
Cause of activation
Reset
Reset
Icon
Action
Regulators
Alarm
Reverse valve
Recovery valve
Free-cooling on/off valve
Auxiliary relay
Idle running valve
Supply ventilation
Condensation ventilation
Support/boiler/anti-freeze
Pump/and water evaporator
and condenser
Compressors
Pump down solenoid valve
1592025050 iProChill v2.5 10D00 AG v1.3 GB 18.02.2016.docx
It follows its regulation
It follows its regulation
It follows its regulation
It follows its regulation
It follows its regulation
It follows its regulation
AEun (unloading signal from evaporator)
Unload notify (evap.)
In working mode if the evaporator water inlet temperature measured > Un1 set
for the time set in the Par. Un3
 if the water temperature measured < Un1 set – Un2 differential

By unloading function inserted after the time set Par. Un4
Automatic
flashing
Alarm relay + buzzer NOT activated
Relay + buzzer NOT activated
It follows its regulation
it follows its regulation
it follows its regulation
It follows its regulation
It follows its regulation
It follows its regulation
It follows its regulation
It follows its regulation
It follows its regulation
It follows its regulation
It follows its regulation
iProCHILL
188/205