Emerson Dixell iProChill IPC115D Application Manual page 26

Press the ESC key several times to go back to the main screen.
5.7 ALARM KEY IN MAIN SCREEN
When an alarm occurs, the display shows the flashing icon
Press any key to silence the buzzer.
Moreover, the alarms key starts to flash alternately with the icons
By pressing the key, pass to the alarms in progress screen:
Three types of alarms can be present:


Resettable in this case, the alarm is not active and can be reset. Position the cursor on the alarm
element and press RESET.


Password in this case, the alarm is not active, but a password is required to reset it.


Active the alarm is still in progress.
If there are several resettable alarms, instead of selecting them one by one, press RST ALL and they will all
be reset together.
To reset an alarm that is protected by a password, operate as follows:

Select the alarm marked by "Password".

Press RESET.
1592025050 iProChill v2.5 10D00 AG v1.3 GB 18.02.2016.docx
and the buzzer starts to operate.
/
iProCHILL
;
26/205