Emerson Dixell iProChill IPC115D Application Manual page 38

For each individual compressor it is possible:

To reset the working hours

Reset the number of start-ups

Disable compressor working (e.g. perform maintenance)
To reset the values, position the cursor on the element and press the RESET HOURS or RESET STARTS
key:
The cursor will automatically position itself on the next element, to modify it repeat the operation just
described.
To enable or disable a compressor, position the cursor on the element and press the ENB/DIS key:
The cursor will automatically position itself on the next element, to modify it repeat the operation just
described.
1592025050 iProChill v2.5 10D00 AG v1.3 GB 18.02.2016.docx
iProCHILL
38/205