Emerson Dixell iProChill IPC115D Application Manual page 61

The information that appears in the main screen is:

to indicate that at least one of the compressors is working.

to indicate that the evaporator pump
condenser pumps are present in the case of WATER-WATER configuration).

to indicate that the condenser fans are working
(in the case of AIR-AIR or AIR-WATER unit configuration)
If the alarms occur or particular working modes sub-enter, the following icons will be shown on the main
screens:

flashing to indicate that an alarm is active

to indicate that the UNLOADING mode is in progress

on to indicate that the defrost cycle is in progress, flashing during the count down

to indicate that the anti-freeze/support heaters are active

automatic switch-off and/or energy saving is enabled during the current day

to indicate that the unit is working within the energy saving period or that the dynamic set-
point is active

to indicate that the domestic hot water production is active
1592025050 iProChill v2.5 10D00 AG v1.3 GB 18.02.2016.docx
and/or the condenser pump
iProCHILL
are working (the
61/205