Emerson Dixell iProChill IPC115D Application Manual page 192

10.31 GENERIC ALARM 2
Alarm code
Display in keyboard
Cause of activation
Reset
Reset
Icon
Action
Regulators
Alarm
Other loads
10.32 COMPRESSORS MAINTENANCE ALARM
Alarm code
Display in keyboard
Cause of activation
Reset
Reset
Icon
Action
Regulators
Alarm
Other loads
10.33 EVAPORATOR FAN/ PUMPS MAINTENANCE ALARM
Alarm code
Display in keyboard
Cause of activation
Reset
Reset
Icon
Action
Regulators
Alarm
Other loads
1592025050 iProChill v2.5 10D00 AG v1.3 GB 18.02.2016.docx
ALc2 (Generic alarm 2)
Generic AL2
DI configured as Generic alarm 2 digital input (DI type=90) active for the time
set in the Par AL58
DI configured as Generic alarm 2 digital input (DI type=90) not active for the
time set in the Par AL59
If AL56=0, always automatic.
If AL56=1, automatic-manual. It becomes manual after AL57
interventions/hour.
flashing
Alarm relay (DO type=167) + buzzer activated
Relay + buzzer activated
Off
C1Mn ...C16Mn (compresser n° 1...16 maintenance request)
C1 maint req. ...C16 maint req.
Compressor is configured and its working hours > timer set by CO53
Reset working hours (from keyboard)
Automatic (after the hours reset)
flashing
Alarm relay + buzzer activated
Relay(DO type=1) + buzzer activated
They follow their regulation
AEP1 (evaporator n° 1 water pump maintenance request)
AEP2 (evaporator support n° 2 water pump maintenance request)
Evap.pump 1 maint
Evap.pump 2 maint
Water/fan pump working hours >= timer set PA13
Water support pump working hours >= timer set PA14
Reset working hours (From keyboard)
Automatic (after the hours reset)
flashing
Alarm relay (DO type=1) + buzzer activated
Relay + buzzer activated
They follow their regulation
iProCHILL
192/205