Installation; Preparing The Installation - Mobotix D26 Dome Manual

D26 Camera Manual: Installation
2
Although the MOBOTIX D26 has been primarily designed for installation on walls and ceil-
ings, it can also be mounted to a pole or the corner of a building, for example, using the
appropriate MOBOTIX accessories.
2.1
Before installing the MOBOTIX D26, the following questions should be answered:
1. Where will the camera be mounted?
2. Which other mounting options are available?
3. How is the camera connected to the network and how is the power supplied?
4. How are the connections furnished from the building?
5. What cabling considerations are necessary?
The following sections contain a brief answer to each of these questions, as well as references
to the relevant sections in this manual. For more information on the MOBOTIX D26 and
available accessories, please see www.mobotix.com.
28

INSTALLATION

Preparing the Installation

Mounting to a ceiling or wall, see Section 2.1.1, «Ceiling and Wall Mounting»
On-wall mounting, in-ceiling mounting, vandalism protection, wall mounting, pole
mounting, see Section 2.1.2, «Mounting Options»
MX-NPA-PoE or other PoE components (IEEE 802.3af), see Section 2.1.3, «Network
Connection and Power Supply, UPS»
Sockets, see Section 2.1.4, «Preparing the Camera Connections, MX-Overvoltage-Protection-
Box»
Wiring, see Section 2.1.5, «Wiring, Fire Prevention, Lightning and Surge Protection»