Outdoor Installation On A Wall, Pole Or Corner (With Accessories); Mobotix Ag • Security-Vision-Systems • Made In Germany - Mobotix D15D Manual

Overview Of Mounting Options
Special Case: D15D-Pano Mounted To A Wall Without The Wall Mount
The lens mount unit has to be rotated by 180° so that you do not get an upside down pan-
orama image. For further information, see the end of Section 2.3.1, «Mounting Lens Units» .
Make sure that the camera is always mounted on a smooth surface . Otherwise,
the sealing lip on the underside of the housing will not be able to close tightly or
will bend upwards, which leads to leaks between the outer shell and the housing.

2.1.2 Outdoor Installation On A Wall, Pole Or Corner (With Accessories)

The associated Outdoor Wall Mount can be used to mount the D15D outdoors. The
camera is then compliant with the IP65 protection class (fully dustproof and resistant to
water jets). Ambient temperatures may vary between –30 to +60°C/–22 to 140°F, making
it the ideal camera for the most demanding weather situations. The drill holes must be
prepared for the installation. Use the supplied drilling template to mark the position of the
holes for the fixtures and the holes through which the cables will be led later on (fold-out).
If you would like to mount the MOBOTIX D15D to the corner of a building or to a pole, you
should consider using the MOBOTIX Corner And Pole Mount. This mount can only be used
together with the Outdoor Wall Mount. The supplied stainless steel straps allow the mount to
be attached to poles with diameters between 60 and 180 mm.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Note
45
/124
The folded drilling
templates can be found
at the end of the manual
When printing, make sure
that the drilling template
is printed in its original
size (is neither enlarged
nor reduced in size)
Make sure that the
arrows are pointing
upwards when mounting