Mobotix Software; Integrated Camera Software (Firmware) - Mobotix D26 Dome Manual

MOBOTIX Software

1.6 MOBOTIX Software
1.6.1 Integrated Camera Software (Firmware)
MOBOTIX cameras and connected MxBus modules operate with built-in firmware whose
functions are accessed by the MOBOTIX MxManagementCenter remote stations and
MOBOTIX MxBell.
The D26 models therefore also feature a variety of functions that are integrated in the firm-
ware: from motion detection and long-term storage right through to alarm notification via
video IP telephony. The virtual PTZ functions allow you to continuously zoom into or out of
a MOBOTIX camera image using either the mouse wheel or a joystick.
When recording image or video sequences, you can choose to store either the section of the
live image that is visible or the full sensor image (full image storage). This also allows you
to examine parts of an image or video that had not been visible in the live image section on
display at the time of the recording.
Unlike in the camera systems from other manufacturers, there is no need to buy and install
additional software on your computer thanks to the MOBOTIX firmware that can be accessed
directly in a web browser via the camera IP address. Instead of using a web browser, you can
also download the free MxManagementCenter video management software from the MOBOTIX
website (www.mobotix.com > Support > Download Center > Software Downloads) to
quickly display multiple cameras on one monitor or on an entire video wall, switch alarms
with sound or conveniently search for an event. The MOBOTIX MxBell for iOS and Android
devices (iOS 11/Android 5.0 and higher) is also available free of charge from the App Store/
Google Play for your mobile applications.
Download free of charge
from www.mobotix.com
No license fees!
Free updates!
25