Table of Contents
Advertisement
44
/146
M24M Camera Manual: INSTALLATION
2
INSTALLATION
Although the M24M is primarily designed for installation on walls and ceilings, it can also
be installed on a mounting pole using the appropriate MOBOTIX accessories. The different
installation options are described in Sections 2.4 and below, while the drilling templates
are included at the end of the manual.
2.1
Preparing The Installation
Before installing the MOBOTIX M24M, the following questions should be answered:
1. Where will the camera be mounted?
Mounting to a wall or ceiling and special features of the L11 lens, see Sections 2.1.1 to 2.1.3
2. Which other mounting options are available?
Mounting to a pole with pole mount, see Section 2.1.4
3. How is the camera connected to the network and how is the power supplied?
MX-NPA-PoE or other PoE components (IEEE 802.3af), see Section 2.1.5
4. How are the connections furnished from the building?
Wall outlets, see Section 2.1.6
5. What cabling considerations are necessary?
Wiring, see Sections 2.1.7 and 2.9
The following sections contain an answer to each of these questions, as well as references
to the relevant sections in this manual. For more information on the MOBOTIX M24M and
currently available accessories, please see: www.mobotix.com.
2.1.1
Flexible Installation Using VarioFlex Mount
Like all MOBOTIX cameras, the M24M is extremely flexible in terms of how and where it
can be installed. An M24M can be used for both indoor and outdoor applications. In fixed
or mobile applications - constantly changing locations or in/on vehicles of any kind. The
M24M cameras have been certified weatherproof according to IP66 and can work reli-
ably in temperature ranges from -30 °C to +60°C (-22°F to +140°F) without extra housing,
heating or fan. A practical sun protective cover is integrated into the extremely resistant
housing, which is made of UV-resistant special-purpose plastic.
Thanks to the camera's unique VarioFlex mounting system (supplied as standard), the
M24M camera can be mounted quickly and easily on any wall, ceiling or even a round
pole of up to 18 cm in diameter (when combined with the stainless steel pole mount). The
VarioFlex mounting system allows a wide positioning range in both the horizontal and
vertical directions (rotating and tilting) to enable precise adjustment to suit the area to
be monitored. The mount also fits directly over flush-mounted RJ45 sockets (without
the frame) to fully conceal the cable, thus improving the watertightness and security of
the installation.
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Advertisement
Table of Contents
