Inserting The Microsd Card - Mobotix D26 Dome Manual

D26 Camera Manual: Installation
Push-Push operation:
Insert MicroSD card
and push once.
64

2.8.2 Inserting the MicroSD Card

1. Insert the MicroSD card: Push the MicroSD card into the card
slot as shown, until an audible and perceptible click indicates
it is in place.
Remove the camera dome. Take the delivered plastic foil or
•
a cotton cloth, insert the dome into its seat and turn it in clock-
wise direction.
• Attach the outer shell: Place the outer shell onto the cam-
era and tighten all four Allen screws using the supplied Allen
wrench. Make sure that the rubber seal is seated properly.
• Activate recording: If you have inserted a MicroSD card that has already been MxFFS
formatted, you can activate recording under Admin Menu > Storage on External File
Server / Flash Device. Once the camera has been rebooted, it automatically activates
recording.
• If you are using a new MicroSD card, it must first be formatted as described in Section 3.5,
«MicroSD Card Recording»,.