Installation
Make sure to copy the IP address (1) on the back of the camera housing! You will
need this address to configure the camera in the browser (see
Browser, p.
71)
Fig. 7: IP address on the back of the camera housing
The MOBOTIX M73 has been designed for wall mounting. Using the pole mount accessory,
you can also install the camera on a pole (see
plates are available on
Documentation> Drilling
www.mobotix.com > Support > Download Center > Marketing &
Templates.
Camera Software in the
Mounting Options, p.
40). The drilling tem-
11
31 / 74