Mobotix D26 Dome Manual page 48

D26 Camera Manual: Installation
Required Parts
Please first check that all components supplied with the In-Ceiling Set are present in the
original packaging. The following additional tools are required for installation:
•
•
•
•
•
•
48
Power drill with matching hole saw (150 mm diameter) or jigsaw
MOBOTIX drilling templates (on www.mobotix.com)
Scissors to cut out the template
Pen to mark the hole positions
Two blue In-Ceiling wrenches from the In-Ceiling Set
Materials and tools needed to connect the pre-installed MOBOTIX network cable in
the camera with the on-site network cable