Installing The Vandalism Set; Mounting Instructions - Mobotix D26 Dome Manual

Installing the Vandalism Set

2.5 Installing the Vandalism Set

2.5.1 Mounting Instructions

The Vandalism Set provides additional security and protection for D26 cameras with little
effort and at a low cost. It is ideally suited for use under particularly demanding conditions
(such as prisons, trouble areas, train stations, etc.). The set consists of a robust stainless steel
outer shell that is available in five different colors and a reinforced plastic dome.
To install the Vandalism Set, replace the standard plastic outer shell with the stainless steel
outer shell of the Vandalism Set (including the safety screws and four mounted spacers). In
addition, replace the original dome of the D26 with the reinforced dome of the Vandalism Set.
The Following Additional Tools Are Required for Installation:
• Allen wrench for removing the standard outer shell (included in the D26 packaging)
• Screwdriver with bit receptacle for the two-hole driver bit
51