Mounting The Camera Without Accessories; Mounting Instructions - Mobotix D26 Dome Manual

D26 Camera Manual: Installation
2.2

2.2.1 Mounting Instructions

As an allround camera, the D26 is primarily designed for installation on walls or ceilings.
In general, direct installation of the camera without any accessories is always possible.
However, to ensure a flush finish with the surface, you should first install a flush-mounted
wall outlet (space for the connection cable).
If you choose to mount the camera directly to a wall without the MOBOTIX-recommended
wall mount, you should position the camera in the center of the room to guarantee maximum
coverage.
Required Tools
Please first check that all the components supplied with the camera are present in the
original packaging. You will need these additional tools for installing:
•
•
•
•
38

Mounting the Camera Without Accessories

Any additional materials for fastening the camera to a ceiling/wall, if necessary – 4
Torx screws incl. screw anchors and washers are included in the original packaging.
Screwdriver
Power drill for screw anchor holes needed for ceiling/wall mounting
MOBOTIX drilling templates (on www.mobotix.com)