Mobotix D26 Dome Manual page 4

Table of Contents
2
2.1
2.1.1 Ceiling and Wall Mounting
2.1.2 Mounting Options
2.1.3 Network Connection and Power Supply, UPS
2.1.4 Preparing the Camera Connections, MX-Overvoltage-Protection-Box
2.1.5 Wiring, Fire Prevention, Lightning and Surge Protection
2.2
2.2.1 Mounting Instructions
2.2.2 Procedure for Installing the D26 Without Accessories
2.3
2.3.1 Mounting Instructions
2.3.2 Procedure
2.4
2.4.1 Mounting Instructions
2.4.2 Procedure
2.5
2.5.1 Mounting Instructions
2.5.2 Procedure
2.6
2.6.1 Mounting Instructions
2.6.2 Procedure
2.7
2.7.1 Mounting Instructions
2.7.2 Mounting to a Pole
2.7.3 Mounting to a Wall or Building Corner
2.7.4 Mounting the Wall Mount to the Corner and Pole Mount
2.8
2.8.1 Removing the MicroSD Card
2.8.2 Inserting the MicroSD Card
2.9
2.9.1 Notes on Cable Lengths and Power Supply
2.9.2 Network Cabling For D26 With Patch Cables
2.9.3 Power Supply Using a Switch
2.9.4 Power Supply When Connected Directly to a Computer
2.9.5 Power Supply with Power-Over-Ethernet Products
2.9.6 Connecting a USB Cable
2.9.7 Connecting a Two-Wire MxBus Cable
2.9.8 Variable PoE
4 4
Installation
Preparing the Installation
Mounting the Camera Without Accessories
Mounting the Camera with the On-Wall Set
Mounting the Camera with the In-Ceiling Set
Installing the Vandalism Set
Installing the Wall Mount
Installing the Corner and Pole Mount
Replacing the MicroSD Card
Network and Power Connection
28
28
29
31
34
35
36
38
38
40
41
41
44
46
46
49
51
51
52
54
54
56
58
58
60
61
62
63
63
64
65
65
65
66
67
67
68
69
71