Procedure - Mobotix D26 Dome Manual
Hide thumbs
Also See for D26 Dome:
- Quick install (2 pages) ,
- Quick install (2 pages) ,
- Quick installation (2 pages)
Table of Contents
Advertisement
D26 Camera Manual: Installation
2.5.2 Procedure
Remove the camera outer shell: Remove all four Allen screws
•
using the supplied Allen wrench and lift off the outer shell.
Remove the standard dome: Unscrew the dome from the
•
housing (counter-clockwise). Package and store the stan-
dard dome for possible use at a later time.
•
Aim and adjust the lens: When mounting the camera for the first time, please proceed
to Section 3.3.1, «Aiming and Adjusting the Lens».
•
Mount the reinforced dome of the Vandalism Set. Tighten it
in a clockwise direction using a soft cotton cloth. If neces-
sary, clean the dome with a cotton cloth before installing it.
52
Advertisement
Table of Contents
