Start Options Of The Camera - Mobotix D26 Dome Manual

D26 Camera Manual: Operating the Camera
1 2
LEDs
Key
LED default settings:
1
Power (on),
Error (flashing)
2
Recording (flashing)
LED
flashes
1 x
2 x
3 x
4 x
*Only on cameras with audio option and installed speaker.
82

3.2.4 Start Options of the Camera

By default, the camera starts as DHCP client and automatically tries to get an IP address
from a DHCP server. To start the camera in a mode different from the default mode, you can
activate the boot menu of the camera.
Preparing the Camera
• Disconnect the camera's power supply.
• Reconnect the power supply of the camera.
Activating the Boot Menu
The red LED lights up red 5 to 10 seconds after establishing the power supply and will stay on
for 10 seconds. Briefly press the key. The camera enters the boot menu, ready for selecting
one of the start options.
The LED now flashes once and repeats the flashing signal after pausing for one second (the
number of flashes indicates the current start option). To go to the next start option, briefly
press the key again (< 1 sec). After the last start option, the camera returns to the first option
(LED flashes once).
Start Meaning
Option
— This option is not used on this camera model.
Factory Starts the camera with factory defaults (factory default IP address,
Defaults users and passwords will not be reset).
Starts the camera as DHCP client and tries to obtain an IP address
Automatic IP
from a DHCP server. If a DHCP server cannot be found or no IP address
Address
can be obtained, the camera starts with its factory default address.
Recovery Starts the camera with the recovery system, e.g., in order to recover
System from a failed update of the camera software.
Selecting a Start option
Press the key longer (> 2 sec). The camera confirms the selection by flashing rapidly three
times. You can now remove the paper clip. After 20 sec, the camera will confirm the selection
by playing a sound according to the table above.
If nothing is selected, the camera will resume its normal boot process after a certain time.
Audio
Confirmation*
—
Boing
Boing Boing
Alarm Sound