Stand/Wall Mount For Camera Tests; Miniusb Cable To Miniusb (Straight/Angled) - Mobotix D26 Dome Manual

D26 Camera Manual: Product Overview
Only cables with
angled plugs can be
used for the D26
20

1.5.8 Stand/Wall Mount for Camera Tests

Order no.: MX-OPT-TW-Demo-1
The Stand/Wall Mount is a useful accessory for testing and for finding the optimum mounting
position of the camera. The set also includes an Allen wrench as well as a Torx screw with
dowel and the corresponding Torx wrench for installing as alternative wall mount for testing.
Using as a Stand (with/without tripod)
Using this stand, you can now place the camera upright on a flat
surface or mount the whole assembly on a tripod (1/4" tripod
thread at the bottom of the stand).

1.5.9 MiniUSB Cable to MiniUSB (Straight/Angled)

Order no.: MX-CBL-MU-EN-PG-STR-05/2/5
(straight/angled)
The MOBOTIX MX-232-IO-Box can be connected directly
to the D26 with this cable, which is up to five meters long.