Mobotix D26 Dome Manual page 76

D26 Camera Manual: Operating the Camera
Default user data
User name: admin
password: meinsm
76
2. Set Up the Target Network Parameters of the MOBOTIX Camera:
1. Open a web browser on the computer and enter the default IP address of the MOBOTIX
camera in the address bar of the browser (for example, 10.8.0.99). Pressing Enter
displays the user interface of the MOBOTIX camera (see also Section 3.2.2, «First Images
and the Most Important Settings in the Browser»).
2. Click on the Admin Menu softbutton in the user interface of the MOBOTIX camera.
The Quick Installation starts automatically once the
admin user has logged on.
Note: The Quick Installation can also be executed at a later stage by opening
Admin Menu > Network Setup > Quick Installation.
3. Enter the target network parameters of the camera on
the appropriate page of the Quick Installation assistant.
Note: The network parameters can also be modified ret-
rospectively via Admin Menu > Network Configuration >
Quick Installation
4. Once you have completed the Quick Installation and rebooted the camera, the new
network parameters will be activated. The camera can now be connected to the
target network and, if required, further configured.
.