The First Program - WAGO 750-842 Quick Start Quide

10 • Quick Start

The first program

2.3 The first program
Prerequisite:
The WAGO-I/O-PRO 32 software has to be installed correctly and started.
You can start a new project via ! File ! New.
Example:
Fig. 3: WAGO-I/O-PRO 32, Creating a new POU
A new POU "PLC_PRG" is created using the programming language "ST"
(Fig. 3) .
Before programming the controller 750-842, it must be selected. This is done
via ! Extras ! PLC selection.
Fig. 4: WAGO-I/O-PRO 32, Coupler selection
Choose "750-842 Vx.x Ethernet Controller" (Fig. 4).
A PLC configuration under ! Resources ! PLC Configuration is not made
with the Ethernet controller 750-842.
WAGO-I/O-SYSTEM 750
ETHERNET StarterKit 1