Confirmation Of Conversion Characteristic - Mitsubishi Electric Q62DAN User Manual

5 UTILITY PACKAGE (GX Configurator-DA)

5.6.4 Confirmation of Conversion Characteristic

5 - 27
[Purpose]
The converted value of digital-analog conversion can be confirmed according to
the tilt of the graph, based on the offset/gain setting.
[Operating procedure]
Monitor/Test window
[Setting screen]
[Explanation of items]
(1) Items
I/O characteristic diagram: Displays the I/O conversion characteristic to the
prepared offset/gain setting.
(2) Setting details
Analog/Range setting
Analog:
Range setting: Make selection from "Normal resolution" or "High
Offset/Gain setting
Offset value:
Gain value:
Offset/gain setting
Select the output (voltage/current) when a digital value is
converted to an analog value.
resolution".
Refer to Section 3.1.1 for the digital input values and
maximum resolutions of the normal resolution mode and
high resolution mode.
Enter an offset value to display the I/O characteristic
diagram.
Enter a gain value to display the I/O characteristic diagram.
MELSEC-Q
Conversion characteristic
5 - 27