Connecting The Instrument Hose; Attach/Remove The Housing And Nozzle; Applying Air, Water, Or Spray - Dentsply Sirona Intego Operating Instructions Manual

Dentsply Sirona
Operating Instructions Intego
C B
A
64 5 7 4 98 D3543
D3543.201.01.08.02 02.2020
4.5.7.4

Connecting the instrument hose

CAUTION
There may be exposed voltage!
Risk of electric shock!
➢ Do not operate the media lever when the housing is removed!
1. Attach the valve body A to the supply hose, observing the various
tube diameters. The valve body may also remain in the housing.
2. Screw the cap nut B onto the valve body and tighten it.
4.5.7.5

Attach/remove the housing and nozzle

Attachment
1. Align knob A and recess B so they face each other.
2. Attach the housing until it clicks into place.
3. Twist the nozzle onto the housing.
4. Check to make sure the nozzle is firmly attached.
CAUTION
If the nozzle is not locked in place, it can come loose when the
Sprayvit E is operated and fall into the patient's throat.
Removal
1. Twist the nozzle to detach it from the housing.
2. Press the lock knob and pull the valve body out of the housing at
the cap nut.
4.5.7.6

Applying air, water, or spray

The following instructions apply to the standard version (water on the
right) of the Sprayvit E 3-way syringe. A Sprayvit E with inverted media
(water on the left) is available as an option.
➢ Press the Air key A.
Ä Air flows out of the instrument tip.
➢ Press the Water key B.
Ä Water flows out of the instrument tip.
➢ Press the Air key A and the Water key B simultaneously.
Ä Spray flows out of the instrument tip.
➢ Twist the nozzle C to reach the desired direction of spray.
4 Operation
4.5 Dentist element
97