Configuring The Treatment Center On Easytouch; Opening The Setup Dialogs - Dentsply Sirona Intego Operating Instructions Manual

4 Operation
4.15 Configuration of the treatment center (setup)
10:45:03
S 0
B
1 2
Auto
Aqua
Setup
208
4.15.2

Configuring the treatment center on EasyTouch

4.15.2.1

Opening the setup dialogs

ü All instruments are in place. The Start dialog is displayed on the
touchscreen.
ü The required user profile is active.
1. Press the Sub-dialog fixed key.
Ä The Start sub-dialog is displayed.
San
Apex Dist
Setup
2. Hold down the Setup button (> 2 s).
Ä Four setup dialogs are offered for selection.
Key symbols of the four setup dialogs line by line from left to right:
● Date and time
● Control options
● Network connection
● Service domain (for service engineers only)
The current software version of the treatment center is displayed on the
left side of the touchscreen.
➢ Touch the corresponding key to open the Setup dialogs.
Some of the setup dialogs comprise several pages. Using the Scroll
forward key, you can switch to the next Setup dialog page.
IMPORTANT
Setup program, storing settings
The setup program closes automatically if no key is activated in 25
seconds. All of the settings you have made will be accepted when you
leave the setup program.
IMPORTANT
Missing function keys
Function keys for functions which the treatment center equipment
does not include are not displayed on the touchscreen.
Dentsply Sirona
Operating Instructions Intego
64 5 7 4 98 D3543
D3543.201.01.08.02 02.2020