Maintenance And Repair - Dentsply Sirona Intego Operating Instructions Manual

Dentsply Sirona
Operating Instructions Intego
Authorized technical personnel and spare
parts
Maintenance intervals
64 5 7 4 98 D3543
D3543.201.01.08.02 02.2020
well as the requirements for plastics used in the transport of drinking
water. It can be connected directly to the public drinking water supply.
The Intego treatment center, provided it is equipped with a fresh water
bottle not connected to the public drinking water supply, also complies
with the requirements of EN 1717 and the DVGW German Gas and
Water Association).
In both cases, the treatment center then bears the DVGW label next to
the rating plate.
Treatment center without isolation from public drinking water supply
If compliance with EN 1717 is stipulated nationally, appropriate
equipment must be installed beyond the treatment center to protect the
public drinking water system.
This applies to the following unit versions:
● Intego Prowithout disinfection system
● Intego without fresh water bottle
● Intego with a fresh water bottle connected to the public drinking
water supply.
The treatment center then does not bear the DVGW label.
Please always adhere to the national requirements with regard to
connecting treatment centers to the public drinking water supply.

Maintenance and repair

2.7
As manufacturers of dental medical units and in the interest of the
operational safety of your system, we stress the importance of having
maintenance and repair of this unit performed only by ourselves or by
agencies expressly authorized by us. Furthermore, faulty components
must always be replaced with original spare parts.
We suggest that you request a certificate showing the nature and extent
of the work performed from those who carry out such work; it must
contain any changes in rated parameters or working ranges (if
applicable), as well as the date, the name of the company and a
signature.
Despite the outstanding quality of your treatment center and regular
care by the practice team, in the interest of operational safety, it is
essential to have preventive maintenance performed at scheduled
intervals.
In order to ensure the operational safety and reliability of your treatment
center and to avoid damage due to natural wear, as the system owner
you must have your system checked regularly by an authorized service
technician from your dental depot. Furthermore, safety checks must be
performed. Please contact your dental depot to obtain a maintenance
offer. For more information, please refer to "Maintenance by the service
engineer" [→ 317].
2 Safety instructions
2.7 Maintenance and repair
17