Connecting The Ac Plug Adapter; Recharging The Battery - Dentsply Sirona X-Smart Apex Locator User Manual

6.3

Connecting the AC Plug Adapter

Select the plug adapter that matches your electric power outlet.
EUR
plug
Slide the plug adapter downwards into the slots until it locks in place
with a click. To remove, press the locking button (see Fig. 3) and
pull out the plug adapter.
6.4

Recharging the Battery

X-Smart
is powered by a lithium-ion rechargeable battery. Battery status
during the operation is shown on the screen.
When the battery is low (lower than 25%), battery indicator will turn
blinking red, meaning that the battery requires recharging. However,
the X-Smart
with low battery for several treatments before the device shuts
down.
To charge the battery, follow the next steps:
1. Complete the measurements and disconnect the
measurement cable from the patient.
2. Unplug
AUS
plug
Fig. 3 Plug adapters for the charger
®
Apex Locator is a battery-operated portable device which
®
Apex Locator will continue normal operation even
the measurement cable
UK
plug
from the
10/38
USA/JAP
plug
Locking
button
device.