Moving The Patient Chair Via Chair Programs; Moving The Patient Chair To The Entry/Exit Position - Dentsply Sirona Intego Operating Instructions Manual

Dentsply Sirona
Operating Instructions Intego
0
0
0
64 5 7 4 98 D3543
D3543.201.01.08.02 02.2020
4.4.8

Moving the patient chair via chair programs

The chair programs can be selected using the fixed keys on the
EasyPad or the touchscreen on the EasyTouch. They can also be
selected using the C+ electronic foot switch. The entry/exit and mouth
rinsing positions can also be selected using the fixed keys on the
assistant element.
You can individually reprogram the factory preset chair programs to suit
your own wishes; see "Creating chair programs" [→ 80].
WARNING
The dentist element can be positioned within the movement range of
the patient chair.
During an automatic program run, such as moving toward the entry/
exit or mouth rinsing positions, the patient may collide with the dentist
element or its support arm. The patient could be injured.
➢ Before moving the patient chair, position the dentist element to
make a collision with the patient or the patient chair impossible.
IMPORTANT
Chair movements with cuspidor swiveled in Intego
With the cuspidor bowl swiveled in, the chair cannot be moved. This
prevents the patient from colliding with the cuspidor. Swing the
cuspidor outward before initiating chair movement.
4.4.8.1

Moving the patient chair to the entry/exit position

The following functions are factory preset in the entry/exit position to
facilitate patient entry and exit:
● The patient chair moves to an upright position
● The operating light switches off
Via fixed keys on the EasyPad
➢ Press the 0 key briefly (< 2 s).
Via the touchscreen on the EasyTouch
ü The Start or Instrument program is displayed on the touchscreen.
➢ Touch the 0 key briefly (< 2 s).
Via the C+ electronic foot control
ü All instruments are in their holders.
➢ Press the right button of the C+ electronic foot control.
4 Operation
4.4 Patient chair
75