X-Ray Tube Unit - Dentsply Sirona Intego Operating Instructions Manual

4 Operation

4.12 X-ray tube unit

184
X-ray tube unit
4.12
The Intego and Intego Pro treatment centers can be equipped with the
Heliodent Plus X-ray tube unit. No X-ray tube unit is available for
treatment centers with the Ambidextrous option.
The X-ray tube unit is attached to the light post of the treatment center
using a multi-jointed support arm that can be adjusted both horizontally
and vertically. Brakes in the support arm hold the X-ray tube unit in the
position to which it has been adjusted.
The X-ray parameters are set on the wall adapter of the X-ray tube unit
or on a "remote timer".
The intraoral X-ray system Xios XG USB module can be connected to
the PC via the USB interface on the dentist and assistant element. For
details, please refer to the section "USB interface" [→ 202].
WARNING
The X-ray tube unit can be positioned within the movement range of
the patient chair.
Moving the patient chair may cause the patient to collide with the X-
ray tube unit or its support arm. The patient could be injured.
➢ Before moving the patient chair, position the X-ray tube unit to
make a collision with the patient or the patient chair impossible.
CAUTION
Gaps appear between the internal hinges when moving the support
arm.
Fingers may be crushed in these gaps.
➢ Ensure that you never place your fingers in the gaps between the
hinges, neither during operation nor for cleaning purposes.
IMPORTANT
See also the Heliodent Plus instructions for use.
Dentsply Sirona
Operating Instructions Intego
64 5 7 4 98 D3543
D3543.201.01.08.02 02.2020