Malfunctions; Messages On The Easypad - Dentsply Sirona Intego Operating Instructions Manual

Dentsply Sirona
Operating Instructions Intego
/
64 5 7 4 98 D3543
D3543.201.01.08.02 02.2020
7

Malfunctions

Messages on the EasyPad

7.1
Errors on the EasyPad display
Messages are shown on the EasyPad display, such as:
Safety switch triggered [→ 70]
Days until next sanitation [→ 293]
Days until next maintenance date [→ 317]
Change amalgam separator [→ 280]
Refill with agent for disinfecting the water paths [→ 276]
Refill water for stand-alone water supply [→ 165]
Refill cleaning agent for chemical suction hose cleaning [→ 260]
Error messages with error code [→ 321]
Time of error message
The messages will be displayed after the treatment center is switched
on. If an error occurs during treatment, it will be displayed after the
instruments are put in the holder.
Only single messages can be displayed on the EasyPad. If there is
more than one message, a dot at the end of the EasyPad display will
light up or flash when the instruments are put in the holder.
Acknowledging messages
The flashing dot means that not all messages have been acknowledged
by the user. If the dot remains lit, all messages have been
acknowledged, but the errors have not been eliminated.
ü All instruments are in their holders.
ü A dot lights up or flashes at the end of the EasyPad display.
7 Malfunctions
7.1 Messages on the EasyPad
319