Installing and removing system components
Topics:
•
Safety instructions
•
Before working inside your system
•
After working inside your system
•
Recommended tools
•
Sled
•
Air shroud
•
Cooling fan
•
PCIe card module
•
Cable M.2 riser board
•
Motherboard bridge module
•
Motherboard interposer board
•
Sled cables kit
•
Motherboard bridge board
•
Mini PERC card module
•
Mini PERC card battery
•
Mini PERC card
•
Mini PERC adaptor board
•
Mini PERC riser board
•
System memory
•
Expansion cards and expansion card risers
•
Processor and heat sink
•
Network daughter card
•
System battery
•
System board
•
Trusted Platform Module
Safety instructions
NOTE:
To avoid injury, do not lift the system on your own, get others to assist you.
WARNING:
Opening or removing the system cover while the system is turned on may expose you to a risk of
electric shock.
CAUTION:
Do not operate the system without the cover for a duration exceeding five minutes. Operating the
system without the system cover can result in component damage.
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that are shipped with your product.
CAUTION:
To ensure proper operation and cooling, all bays in the system and system fans must be always
populated with a component or a blank.
NOTE:
It is recommended that you always use an antistatic mat and antistatic strap while working on components inside
the system.
44
Installing and removing system components
5