Table of Contents
Advertisement
IM581127000
Issue AB, March 22, 2012
Battery Connections to Distribution Cabinet Battery Busbars
Danger: Adhere to the "Important Safety Instructions" presented at the front of
Battery may be connected to the battery busbars located in the distribution cabinet, as
detailed in this section, depending on site requirements.
Maximum Lug Width: 1.25 inches
(this location only).
Maximum Lug Width: 1.88 inches
(unless otherwise noted).
Page 78
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
this document.
GND RTN
Battery
(Return Side)
Busbar
(4-Row Cabinet Shown,
Others Similar)
Battery
(Return Side)
Busbar
Chapter 4. Making Electrical Connections
Spec. No. 581127000 (Model 710
+24V SUPPLY
Battery
(Load Side)
Busbar
BATTERY AND BATTERY RETURN CONNECTIONS
3/8-16 Captive Nuts on 1" Centers
(Customer must supply
additional hardware)
Battery
(Load Side)
Busbar
Installation Instructions
)
NPBA
Advertisement
Table of Contents
