Table of Contents
Advertisement
IM581127000
Issue AB, March 22, 2012
Installing Optional Front Battery Cover Procedure
Use existing
battery spacers.
Use kit supplied hardware.
Assembled View
Installing Optional Front Battery Cover onto a List 93 Battery Tray
Page 12
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
1) To install an optional front battery cover onto a List 93 Battery Tray, perform the
procedure in Figure 2-6. Note that batteries must be installed first, as described
in "Installing and Connecting Batteries in List 93 Battery Tray" in Chapter 4.
Making Electrical Connections.
Existing front battery bracket.
Kit supplied spacer bar.
Kit supplied cover.
Figure 2-6
Chapter 2. Installing the System
Spec. No. 581127000 (Model 710
Procedure
1. Install batteries.
2. Install kit battery cover to
existing front battery bracket.
3. Install kit battery cover with existing
front battery bracket to battery shelf.
Kit Battery Cover
Assembled to Existing
Front Battery Bracket
Front View
Installation Instructions
)
NPBA
Kit Battery Cover
Assembled to Existing
Front Battery Bracket
Rear View
Advertisement
Table of Contents
