Emerson NetSure 710NPBA Installation Instructions Manual page 10

IM581127000
Issue AB, March 22, 2012
Chapter 2. Installing the System





Chapter 3. Setting Jumper and Switch Options




Chapter 4. Making Electrical Connections






Chapter 5. Installing the Modules and Initially Starting the System


Page 2
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Relay Rack Secured to Floor
System Components Mounted in Relay Rack (if required)
Optional Lug Adapter Busbar Kits Installed
Circuit Breakers Installed
Fuses Installed
Jumpers on System Interface Circuit Card Set
Switch Setting on IB2 Interface Board Set
Switch Setting on Optional EIB Interface Board Set
Switch Setting on Optional SM-DU+ Set
Relay Rack Grounding Connection (Frame Ground) Made
AC Input and AC Input Equipment Grounding Connections Made
External Alarm, Reference, Monitoring, and Control Connections Made
Ethernet Connection Made (if required)
Load Connections Made
Battery Connections Made

Batteries Installed and Connected in an optional Battery Tray (if furnished)

Optional Battery Tray Front Battery Covers Installed (if furnished)

Optional Battery Tray Circuit Breaker Guards Installed (if furnished)
Rectifier and Converter Modules Installed
System Started, Configured, and Checked
Chapter 1. General Information and Installation Checklist
Installation Instructions
Spec. No. 581127000 (Model 710 )
NPBA