Table of Contents
Advertisement
IM581127000
Issue AB, March 22, 2012
Installing an Optional Bullet Nose Type 6-Position GMT Distribution Fuse Block
Page 20
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
RTN Bar
Figure 2-11
Chapter 2. Installing the System
Installation Instructions
Spec. No. 581127000 (Model 710
1.
Press in tabs to release
lug terminal busbars for
positions to be occupied
by GMT Fuse Block.
Remove two lug terminal busbars
2.
for positions to be occupied
by GMT Fuse Block.
Plug in GMT Fuse Block and secure
3.
at two locations on the RTN bar.
Torque to 72 in-lbs.
GMT Fuse Block Installed View
)
NPBA
Advertisement
Table of Contents
