Table of Contents
Advertisement
IM581127000
Issue AB, March 22, 2012
Conduit Fitting
Slot A
Slot B
Slot E
Slot F
Rectifier Module (PCU) Mounting Slots
Front View
AC
IN
FRAME GROUND CONNECTION
ONE 10-32 X 3/4" STUD
AND HARDWARE
Note: Module mounting positions are lettered left to right as viewed from front of shelf,
A-D in top row and E-H in bottom row.
Note: If mounting positions B, C, F, and G are intended solely for DC-DC Converter installation
(Converter Option must be installed), AC input connections to these positions are not required.
AC Input and Equipment Grounding Connections to Field Expansion Module Mounting Assembly
Page 48
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Holes for 3/4"
(AC Input)
Slot C
Slot D
Slot G
Slot H
Rear View
Chapter 4. Making Electrical Connections
Spec. No. 581127000 (Model 710
Rear View
FRAME GROUND CONNECTION
ONE 10-32 X 3/4" STUD
AND HARDWARE
Figure 4-3
Installation Instructions
)
NPBA
Holes for 3/4"
Conduit Fitting
(AC Input)
AC
IN
Advertisement
Table of Contents
