Table of Contents
Advertisement
Installation Instructions
Spec. No. 581127000 (Model 710
Installing Optional Battery Disconnect Circuit Breakers Procedure
Installing Optional Battery Disconnect Circuit Breakers onto a List 93 Battery Tray
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
)
NPBA
1) To install optional battery disconnect circuit breakers onto the List 93 Battery
Tray, perform the procedure in Figure 2-5.
2) Battery tray wiring is shown in "Installing and Connecting Batteries in List 93
Battery Tray" in Chapter 4. Making Electrical Connections.
Battery Disconnect
Circuit Breaker Assembly
Chapter 2. Installing the System
1. Remove the cover from the battery
disconnect circuit breaker assembly.
2. Secure the battery disconnect circuit
breaker assembly to the battery tray
3. Secure the ground lead under a battery
tray relay rack mounting bolt.
4. After wiring to the battery disconnect
circuit breaker, replace the cover.
5. Repeat for the other side of the battery
tray.
Figure 2-5
IM581127000
Issue AB, March 22, 2012
Page 11
Advertisement
Table of Contents
