Table of Contents
Advertisement
IM581127000
Issue AB, March 22, 2012
IMPORTANT SAFETY INSTRUCTIONS
GENERAL SAFETY
Danger: YOU MUST FOLLOW APPROVED SAFETY PROCEDURES.
Caution: Performing maintenance and/or troubleshooting procedures may
VOLTAGES
AC Input Voltages
Danger: This system operates from AC voltage capable of producing fatal
DC Input/Output Voltages
Danger: This system produces DC Power and may require battery to be connected
BATTERY
Danger: Correct polarity must be observed when connecting battery leads.
Danger: Special safety precautions are required for procedures involving
Page iv
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Performing the following procedures may expose you to hazards. These
procedures should be performed by qualified technicians familiar with the
hazards associated with this type of equipment. These hazards may
include shock, energy, and/or burns. To avoid these hazards:
a) The tasks should be performed in the order indicated.
b) Remove watches, rings, and other metal objects.
c) Prior to contacting any uninsulated surface or termination, use a
voltmeter to verify that no voltage or the expected voltage is present.
d) Wear eye protection, and use recommended tools.
e) Use double insulated tools appropriately rated for the work to be
performed.
interrupt power to the loads, if battery reserve is not sufficient.
electrical shock. AC input power must be completely disconnected from
the branch circuits wiring used to provide power to the system before any
AC electrical connections are made. DO NOT apply AC power to the
system until all electrical connections have been completed and checked.
to it. Although the DC voltage is not hazardously high, the rectifiers
and/or battery can deliver large amounts of current. Exercise extreme
caution not to inadvertently contact or have any tool inadvertently contact
a battery terminal or exposed wire connected to a battery terminal.
NEVER allow a metal object, such as a tool, to contact more than one
termination or battery terminal at a time, or to simultaneously contact a
termination or battery terminal and a grounded object. Even a momentary
short circuit can cause sparking, explosion, and injury.
handling, installing, and servicing batteries. Observe all battery safety
precautions in this manual and in the battery instruction manual. These
precautions should be followed implicitly at all times. Remove watches,
rings, and other metal objects before connecting battery leads.
Important Safety Instructions
Installation Instructions
Spec. No. 581127000 (Model 710
)
NPBA
Advertisement
Table of Contents
