Table of Contents
Advertisement
2. Getting to know the projector.
Projector Items Overview
1
2
5
Image 2-2
1
1
2
1
3
1
4
1
5
1
6
1
7
1
8
1
9
1
2.2
Service and Maintenance
General
The F70 series does not have any user serviceable parts.
All service tasks must only be carried out by the manufacturer, or a Barco authorized service personnel or Barco technicians.
2.3
LED Status Light
About
The F70 Status Led is located on the rear top of the Projector
During normal operation, the LED is not illuminated. In the event of a critical error or high temperature, the LED will illuminate red.
By critical error, the projector cannot be restarted until the projector is disconnected from the power supply and then reconnected
again. If the reason for the error persist, the projector will again go to critical error status.
By high temperature, the projector can be restarted when it has cooled down, and the temperature is back within the normal operating
limitations
18
5
4
3
LED Warning Indicator
Adjustable Feet
Lens
Lens Holder
IR Receiver. For receiving remote control signals
LCD Display
Keypad Panel. Used for local operation of the projector.
Connector Panel. Control and communication interfaces for the projector
Front USB and Triggerboard.
8
9
6
7
601–426 F70 SERIES 16/06/2017
Advertisement
Table of Contents
