EAS30236
CHECKING THE DRIVE BELT
1. Clean:
• Drive belt
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Wipe the drive belt with a clean cloth.
b. Put the drive belt in a mixture of mild deter-
gent and water. Then, remove any dirt from
the drive belt.
c. Remove the drive belt from the mixture and
rinse it off with clean water. Then, let the drive
belt thoroughly dry.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
2. Check:
• Drive belt
Refer to "CHECKING THE DRIVE BELT" on
page 3-21.
3. Check:
• Drive pulley "1"
• Rear wheel pulley "2"
Bent teeth Replace the drive belt and pul-
leys as a set.
1
4. Check:
• Holder "1"
Cracks/damage Replace.
2
4-101
1
EAS32443
INSTALLING THE DRIVE PULLEY
ASSEMBLY
1. Install:
• Drive pulley assembly
• Drive pulley assembly bolt
2. Tighten:
• Drive pulley assembly bolt
TIP
Tighten the drive pulley assembly bolts in the fol-
lowing order, bolt "1", bolts "2", and bolts "3".
Drive pulley assembly bolt
48 N·m (4.8 kgf·m, 35 lb·ft)
2
EAS31423
INSTALLING THE DRIVE BELT
1. Install:
• Drive belt
2. Adjust:
• Drive belt tension
Refer to "DRIVE BELT TENSION" on page
3-21.
BELT DRIVE
2
1
3