Fault Code No. 17, 45 - Yamaha TMAX XP530E-A 2017 Service Manual

Fault code No. 17, 45

TIP
If pulse gaps are detected when the vehicle is traveling at a speed of 30 km/h (19 mi/h) or more, fault
code No. 17 will be recorded. If the vehicle is traveling at a speed of 29 km/h (18 mi/h) or less, fault code
No. 45 will be recorded first and fault code No. 17 will be recorded if the condition continues.
Fault code No.
Item
Symptom
Order Item/components and probable cause
1 Foreign material adhered around the front
wheel sensor
2 Incorrect installation of the front wheel
3 Defective sensor rotor or incorrect instal-
lation of the rotor
4 Defective front wheel sensor or incorrect
installation of the sensor
Fault code No. 18, 46
TIP
If pulse gaps are detected when the vehicle is traveling at a speed of 30 km/h (19 mi/h) or more, fault
code No. 18 will be recorded. If the vehicle is traveling at a speed of 29 km/h (18 mi/h) or less, fault code
No. 46 will be recorded first and fault code No. 18 will be recorded if the condition continues.
Fault code No.
Item
Symptom
Order Item/components and probable cause
1 Foreign material adhered around the rear
wheel sensor
2 Incorrect installation of the rear wheel
17
45
Front wheel sensor (missing pulses)
Front wheel sensor signal is not received properly. (Missing pulses
are detected in the signal while the vehicle is traveling.)
Check or maintenance job
Check the surface of the sensor rotor and wheel sensor
for foreign material, such as metal particles.
Clean the sensor rotor and wheel sensor if necessary.
Check the components for looseness, distortion, and
bends.
Refer to "CHECKING THE FRONT WHEEL" on page
4-24.
Check the surface of the sensor rotor for damage.
Replace the sensor rotor if there is visible damage.
Refer to "MAINTENANCE OF THE FRONT WHEEL
SENSOR AND SENSOR ROTOR" on page 4-26.
Check the wheel sensor for damage and the installed
condition of the sensor. Repair or replace the wheel
sensor if necessary.
Refer to "MAINTENANCE OF THE FRONT WHEEL
SENSOR AND SENSOR ROTOR" on page 4-26.
18
46
Rear wheel sensor (missing pulses)
Rear wheel sensor signal is not received properly. (Missing pulses
are detected in the signal while the vehicle is traveling.)
Check or maintenance job
Check the surface of the sensor rotor and wheel sensor
for foreign material, such as metal particles.
Clean the sensor rotor and wheel sensor if necessary.
Check the components for looseness, distortion, and
bends.
Refer to "CHECKING THE REAR WHEEL" on page
4-35.
8-181
ABS (Anti-lock Brake System)