Maintenance Of The Front Wheel Sensor And Sensor Rotor - Yamaha TMAX XP530E-A 2017 Service Manual

d. Install the new oil seals.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
2. Install:
• Front wheel sensor rotor
Wheel sensor rotor bolt
8 N·m (0.8 kgf·m, 5.9 lb·ft)
LOCTITE®
ECA17200
NOTICE
Replace the wheel sensor rotor bolts with
new ones.
TIP
Install the wheel sensor rotor with the stamped
mark "1" facing outward.
1
A
3. Install:
• Air valve
TIP
• Fasten air valve nut "1" and tighten air valve
locknut "2" to 3.0 N·m (0.30 kgf·m, 2.2 lb·ft).
• When installing the air valve, orient the air
valve referring to the illustration.
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Tighten the air valve nut "1".
Front wheel air valve nut
2.0 N·m (0.20 kgf·m, 1.5 lb·ft)
b. Tighten the air valve locknut "2" while holding
the air valve nut so as not to turn the nut.
Front wheel air valve locknut
3.0 N·m (0.30 kgf·m, 2.2 lb·ft)
a. 45–55
A. Wheel rotation direction
B. Left side
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
4. Measure:
• Wheel sensor rotor runout
Out of specification  Correct the wheel sen-
sor rotor runout or replace the wheel sensor
rotor.
Refer to "MAINTENANCE OF THE FRONT
WHEEL SENSOR AND SENSOR ROTOR"
on page 4-26.
Wheel sensor rotor runout limit
0.25 mm (0.01 in)
EAS30155
MAINTENANCE OF THE FRONT WHEEL
SENSOR AND SENSOR ROTOR
ECA21070
NOTICE
• Handle the ABS components with care
since they have been accurately adjusted.
Keep them away from dirt and do not sub-
ject them to shocks.
• The front wheel sensor cannot be disas-
sembled. Do not attempt to disassemble it.
If faulty, replace with a new one.
• Keep any type of magnets (including mag-
netic pick-up tools, magnetic screwdrivers,
etc.) away from the front wheel sensor or
front wheel sensor rotor.
4-26
FRONT WHEEL
1
2