Installing The Camshafts - Yamaha TMAX XP530E-A 2017 Service Manual

b
b. Lock the timing chain tensioner rod by setting
the circlip "3" to groove "4" while pushing the
timing chain tensioner rod.
3
4
c. Push the timing chain tensioner rod "c".
d. Make sure that the timing chain tensioner rod
comes out "d" of the timing chain tensioner
housing smoothly. If there is rough move-
ment, replace the timing chain tensioner.
c
d
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
EAS30269

INSTALLING THE CAMSHAFTS

1. Install:
• Exhaust camshaft "1"
• Intake camshaft "2"
2
a
1
a. Turn the crankshaft clockwise.
b. When piston #1 is at TDC on the compres-
c. Install the timing chain onto both camshaft
TIP
• Lubricate the camshaft journal with the molyb-
• When installing the timing chain, start with the
• The camshafts should be installed onto the cyl-
5-12
2
1
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
sion stroke, align the "I" mark "a" on the gen-
erator rotor with the stationary pointer "b" on
the generator cover.
sprockets, and then install the camshafts
onto the cylinder head.
denum disulfide oil.
exhaust camshaft and be sure to keep the tim-
ing chain as tight as possible on the exhaust
side.
inder head so that the alignment marks "c" on
the intake camshaft sprocket and the align-
ment marks "d" on the exhaust camshaft
sprocket align with the cylinder head mating
CAMSHAFTS
b
a