1
4
4. Install:
• Footboard (right)
• Side cover (right)
• Fuel tank cover assembly
• Center cover
Refer to "GENERAL CHASSIS (2)" on page
4-11.
• Bottom center cowling
• Side panel
• Bottom side cowling
Refer to "GENERAL CHASSIS (1)" on page
4-1.
EAS30623
CHECKING THE CYLINDER HEAD
BREATHER HOSE
1. Remove:
• Bottom side cowling
• Side panel
• Bottom center cowling
Refer to "GENERAL CHASSIS (1)" on page
4-1.
• Center cover
• Fuel tank cover assembly
• Side cover (right)
• Footboard (right)
Refer to "GENERAL CHASSIS (2)" on page
4-11.
2. Check:
• Cylinder head breather hose "1"
Cracks/damage Replace.
Loose connection Connect properly.
ECA14920
NOTICE
Make sure the cylinder head breather hose is
routed correctly.
2
1
3
3-12
PERIODIC MAINTENANCE
3. Install:
• All removed parts
EAS30626
CHECKING THE CANISTER
1. Remove:
• Bottom side cowling
• Side panel
• Bottom center cowling
Refer to "GENERAL CHASSIS (1)" on page
4-1.
• Center cover
• Fuel tank cover assembly
• Side cover
• Footboard
Refer to "GENERAL CHASSIS (2)" on page
4-11.
• Fuel tank
Refer to "FUEL TANK" on page 7-1.
2. Check:
• Canister
• Canister purge hose
• Fuel tank breather hose
• Canister breather hose
Cracks/damage Replace.
3. Install:
• Fuel tank
Refer to "FUEL TANK" on page 7-1.
• Footboard
• Side cover
• Fuel tank cover assembly
• Center cover
Refer to "GENERAL CHASSIS (2)" on page
4-11.
• Bottom center cowling
• Side panel
• Bottom side cowling
Refer to "GENERAL CHASSIS (1)" on page
4-1.
EAS30799
ADJUSTING THE EXHAUST GAS VOLUME
TIP
• Be sure to set the CO density level to standard,
1