Checking The Exhaust System; Checking The Throttle Body Joints - Yamaha TMAX XP530E-A 2017 Service Manual

1
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
2. Stop the engine and remove the measuring
equipment.
3. Install:
• Intake air pressure sensor hose
• Cap
4. Install:
• Fuel tank
Refer to "FUEL TANK" on page 7-1.
• Footboard
• Side cover
• Fuel tank cover assembly
• Center cover
Refer to "GENERAL CHASSIS (2)" on page
4-11.
• Bottom center cowling
• Side panel
• Bottom side cowling
Refer to "GENERAL CHASSIS (1)" on page
4-1.
5. Adjust:
• Throttle grip free play
Refer to "CHECKING THE THROTTLE
GRIP" on page 3-33.
Throttle grip free play
1.0–3.0 mm (0.04–0.12 in)
EAS31318

CHECKING THE THROTTLE BODY JOINTS

1. Remove:
• Center cover
Refer to "GENERAL CHASSIS (2)" on page
4-11.
2. Check:
• Throttle body joints
Cracks/damage  Replace.
PERIODIC MAINTENANCE
3. Install:
• Center cover
Refer to "GENERAL CHASSIS (2)" on page
4-11.
EAS30625

CHECKING THE EXHAUST SYSTEM

The following procedure applies to all of the ex-
haust pipes and gaskets.
1. Remove:
• Bottom side cowling
• Side panel
• Bottom center cowling
Refer to "GENERAL CHASSIS (1)" on page
4-1.
• Center cover
• Fuel tank cover assembly
• Side cover (right)
• Footboard (right)
Refer to "GENERAL CHASSIS (2)" on page
4-11.
2. Check:
• Exhaust assembly "1"
Cracks/damage  Replace.
• Gasket "2"
Exhaust gas leaks  Replace.
3. Check:
Tightening torque
• Exhaust pipe nut "3"
• Exhaust assembly nut (rear) "4"
Exhaust pipe nut
20 N·m (2.0 kgf·m, 15 lb·ft)
Exhaust assembly nut
31 N·m (3.1 kgf·m, 23 lb·ft)
3-11