Yamaha TMAX XP530E-A 2017 Service Manual page 125

1. Rear brake hose (hydraulic unit to rear brake
caliper)
2. Rear brake hose (rear brake master cylinder
to hydraulic unit)
3. Front brake hose (front brake master cylinder
to hydraulic unit)
4. Front brake hose (hydraulic unit to front brake
caliper)
5. Hydraulic unit
A. Brake hose installation order
1. Install rear brake hose "1" at the indicated
angle. Install front brake hose "3" with the L-
shaped pin in contact with the side of the
hydraulic unit. (The installation order of rear
brake hose "1" and front brake hose "3" of
rear brake hose "2" does not matter.)
2. Install front brake hose "4" with the protru-
sion in contact with the metal part of front
brake hose "3". Install rear brake hose "2"
with the protrusion in contact with the metal
part of rear brake hose "1". (The installation
order of front brake hose "4" and rear brake
hose "2" does not matter.)
3. Tighten the mounting bolts of each brake
hose to the specified torque. (In no particular
order)
B. 16.4–16.8
C. 16–20
2-78
CABLE ROUTING