EAS30492
TROUBLESHOOTING
The ignition system fails to operate (no spark or intermittent spark).
TIP
• Before troubleshooting, remove the following part(s):
1. Front cowling assembly/Side panels
2. Center cover
3. Footboards/Side covers
4. Rear cowling (right)
1. Check the fuses.
(Main and ignition)
Refer to "CHECKING THE FUSES"
on page 8-229.
OK
2. Check the battery.
Refer to "CHECKING AND
CHARGING THE BATTERY" on
page 8-230.
OK
3. Check the spark plugs.
Refer to "CHECKING THE SPARK
PLUGS" on page 3-5.
OK
4. Check the ignition spark gap.
Refer to "CHECKING THE IGNI-
TION SPARK GAP" on page 8-241.
NG
5. Check the spark plug caps.
Refer to "CHECKING THE SPARK
PLUG CAPS" on page 8-240.
OK
6. Check the ignition coil.
Refer to "CHECKING THE IGNI-
TION COIL" on page 8-241.
OK
7. Check the ignition system relay.
Refer to "CHECKING THE RE-
LAYS" on page 8-233.
OK
8. Check the diodes.
(Diode (fuse box) (for XP530D-A),
diode 1 and diode 2)
Refer to "CHECKING THE DI-
ODES" on page 8-239.
OK
Replace the fuse(s).
NG
• Clean the battery terminals.
• Recharge or replace the battery.
NG
Re-gap or replace the spark plugs.
NG
Ignition system is OK.
OK
Replace the spark plug caps.
NG
Replace the ignition coil.
NG
Replace the ignition system relay.
NG
Replace the diode(s).
NG
8-7
IGNITION SYSTEM